Owner`s manual
62 ZIPPIE SALSA & SALSA M
Zippie SALSA M
Parts in the battery box (Fig. 12.22):
Plastic battery box cover for 2 x 12V batteries.•
2 x battery looms with fuse and ring terminals.•
Battery link harness with red and grey connectors.•
Battery Access
Locate & loosen the 2 hand wheels at the front of the •
power base (Fig. 12.23).
Pull the spring loaded catch (Fig. 12.24).•
Carefully tilt the seat back (Fig. 12.25). •
Support the seat with the seat stay (Fig. 12.25). •
Ensure the plastic cap, clips over the end to secure •
the seat.
The Battery Cover is secured by 6 plastic rivets. Use a •
atbladescrewdrivertoliftouttherivets.
Lift the Battery Cover clear. •
Disconnect the GREY plug on the front battery. •
Lift the front battery out using the lifting straps pro-•
vided.
Disconnect the GREY plug on the rear battery (Fig. •
12.26).
Lift the rear battery out using the lifting straps provided •
(Fig. 12.27).
Peel back 1 cover and using 2 x 13.0mm spanners, •
undo & remove the terminal bolt. Repeat for the other
terminal/battery (Fig. 12.28).
Onretting,the• battery terminals must be covered
after connection with the caps provided on the cable
(Fig. 12.29).
Fig. 12.23
Fig. 12.24
Fig. 12.25
Fig. 12.26
Fig. 12.27
Fig. 12.28
Fig. 12.29