Instructions / Assembly

4
www.zippity-outdoor.com
STEP 2: ASSEMBLE THE FENCE FRAME
STEP 2.1
STEP 2.2 STEP 2.3
Identify the top rail (Part C) and the bottom rail (Part D) and position them as shown below. Pressure t two loose
rail end caps (Part B) into the ends of each rail.
Slide (2) posts (Part F) down into the routed
holes in the horizontal rails.
Align the pre-drilled holes in the posts and
the rails. Screw the top and bottom rails into
the front and back of the posts using a total
of (8) ¾” screws (Part H).
Bottom rail has no picket
holes on underside of the rail.
Note: Ensure picket
holes on the bottom
rail are facing up.
Orient the bottoms of the posts as shown
Align Holes