Instructions / Assembly

6
www.zippity-outdoor.com
STEP 4: ATTACH HINGE AND LATCH
STEP 4.1
Align the hinges (Part L) on the top and bottom gate rails as shown. Pre-drill two holes on the face of each rail as
shown. The holes should be roughly ¼” from the edge of the gate rails. Fasten each hinge with two ½” small black
screws (Part O).
¼ in
STEP 4.2
Align the latch nger (Part J) to the top gate rail and pre-drill four holes into the gate rail as shown. Fasten four ½”
small black screws to lock the latch nger in place.