User's Manual

Warranty Information
This product is backed by a One-Year Manufacturer’s Warranty, starting from the date of purchase.
The warranty covers for free repair in accordance with the contents stated herein but does not cover
wear and tear and any malfunction or damages as results of improper usage as stated in this manual.
Installation Procedure
Before installing this product please make sure you have available Bluetooth system or Bluetooth
dongle as basement.
Setting up the Bluetooth Keypad
1. Open the Bluetooth software of your system.
2. Press the “Refresh” or “Renew” the Bluetooth device.
3. Press the ID button of keypad.
4. Your system will find the BT310 keypad device on your Bluetooth dialog.
5. Then double click the BT310 keypad device icon, the system will show a link message and
ask you to enter password. (This procedure may different by your Bluetooth software and
system. Please read your system or software instruction.)
6. After your Bluetooth software show the link message, you can use keypad as well.
Battery Low
1. Low-Battery is indicated by the illumination of the keypad lens. Please replace the battery when
the LED lights up.
2. We recommend using alkaline batteries for the keypad.
3. You may need to reset the Link after replacing new batteries for the keypad.
Warning
Please be careful when resetting the Link for the keypad. Objects with sharp point may break and
leave behind shards.
Troubleshooting
Please visit our On-Line FAQ section for help.
FCC Statement on CLASS B
This equipment has been tested and found to comply with the limits foe a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following