User's Manual

System requirements
IBM or compatible PC
Windows Operating System
Pentium-equivalent processor or above
At least 10MB hard disk space
One available USB port
OS support
Windows XP
Windows 2000/NT
Windows ME
Please do not use this product in ashy, wet, or oily environments. Failure
to do so may shorten the life of this product and may cause bodily harm.
Please keep this product as far away from Radio Frequency
interruption areas as possible.
This is not an outdoor product. Exposing this product to the elements
may cause damages to the product and bodily harm to its users.
Please do not use petroleum, benzene or thinner-based solution to
clean this product.
Laser Mouse
International standards and safety. This Laser device complies with
International Standard IEC 60825-1:2001-08, Class 1 Laser Product,
and also complies with 21 CFR1040.10 and 1040.11, except for
deviations pursuant to Laser Notice No.50, dated July 26, 2001:1)
Emission of a parallel beam of infrared user-invisible light: 2) Maximum
Power of 716 microwatts CW, wavelength range 832-865 nanometers;
3) Operating temperature between 0 ( 32 ) to 40 ( 104 ).
CAUTION: This Laser device has no serviceable parts. Use of controls
or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Safety and Usage Guidelines
1) Do not point infrared beam at eye.
2) In the absence of proper operation and if customer-initiated
troubleshooting is unsuccessful, switch off device and call technical
support.
3) Do not disassemble your product or expose it to liquid, humidity,
moisture, or temperatures outside the specified operating range of 0
( 32 ) to 40 ( 104 ). 4) If you product is exposed to out-of-range
temperatures, Switch it off and allow the temperature to return to the
normal operating range.
B. Setting up the Keyboard and Mouse
1 .Open the keyboard's battery compartment cover and
insert the two pieces of AAA Alkaline batteries.Make
sure they are properly installed. (FIG. 1)
2.Replace the keyboard battery compartment cover.
3.Open the mouse's battery compartment cover and insert
the two pieces of AAA Alkaline batteries. Make sure they
are properly installed and Switch on the switch at the
bottom case.(FIG. 2)
4.Replace the mouse battery compartment cover.
5.Usually the keyboard and mouse have bind in the
factory, if the system cannot recognize the keyboard
and mouse,
please follow step 6~8 to bind keyboard and mouse.
6.Let Keyboard right corner and Mouse to close the
Dongle to 0~15cm.
7.To press any key of keyboard and any button of mouse,
the system will automatically recognize the keyboard
& mouse.
8.The LED indicator on the dongle receiver will show
green light when the connecting have been properly
set and the keyboard and mouse are working.
A. Setting up the Dongle Receiver
1.
Plug the dongle receiver (FIG. 3) into an available
USB
2. Wait for Windows to install drivers for the dongle
receiver, keyboard and mouse.
3. When the dongle receiver has been properly initialized,
its LED light will stay alit.
Installation Procedure
Before installing this product please make sure you have
one available USB port reserved for the dongle receiver.
Dimensions: L105 x W55.5 x H35.5 mm
Weight: 80.7 +/- 25g (with Battery)
Key Number: 3 Keys
(Wheel button on middle button)
Battery: 2 x AAA batteries
Battery Life: 1 Month (Base on average usage)
Channel: 78 Channels
ID: Unique ID for mouse
Radio Frequency: 2.4 GHz
Dimensions: L70xW22.7xH12.3mm
Weight : 10.9g +/-25g
Interface: USB 1.1
Dimensions: 430 x 162x 25 mm
Weight: 620+/- 20g (with Battery)
Key Number: 104 Keys(By language)
Battery: 2 x AAA batteries
Battery Life: 3 Month (Base on average usage)
Channel: 78 Channels automatically switch.
ID: unique ID for each keyboard
Radio Frequency: 2.4 GHz
Hot Keys : previous page, next page, WWW home,
stop, refresh, my favorite, search, e-mail, mute,
previous, play/pause, next, stop, volume down,
volume up, wake up, sleep, power
Warranty Information
This product is backed by a One-Year Manufacturer's
Warranty, starting from the date of purchase. The
warranty covers for free repair in accordance with the
contents stated herein but does not cover wear and tear
and any malfunction or damages as results of improper
usage as stated in this manual.
Warning
Please be careful when resetting the ID's for the keyboard,
mouse and dongle receiver. Objects with sharp point may
break and leave behind shards.
To remove batteries, please repeat steps 4 to 3 or 2 to 1
in reverse order.
Battery Low
1 .Low-Battery is indicated by the illumination of the mouse
Top case. Please replace the battery when the LED
lights up .
2.While the mouse is in sleep mode, please press any
button or move the scroll wheel to wake it up.
3. We recommend using alkaline batteries for the keyboard.
4.You may need to reset the ID's after replacing new
batteries for the keyboard and mouse.
User Manual
Warning
4
5 7
862
1 3
Introduction
Wireless Keyboard x 1
Wireless Laser Mouse x 1
USB 2.4GHz dongle receiver x 1
Installation CD x 1
Manual x 1
Alkaline batteries x4
( 2 AAA for keyboard, 2 AAA for Mouse)
Thank you for your patronage of purchasing our
cordless keyboard and Laser mouse. For your own
safety, please read this manual thoroughly before
using this product. After you have read this manual,
please keep it in place for reference when necessary.
The following items are included in the package.
Please make sure all items are accounted for as you
open the package. If there was any i tem missing or
damaged, please contact the reseller where the
product was purchased or our support center.
Contents in the package
Specifications
Keyboard
Mouse
Dongle Receiver
"2.4GHz All Around Freedom, Infinite
Possibilities"
Aluminum Transport, RF-722
port.
Any malfunction, damage or personal injury caused by the malfunctioning or
damage of the user's personal computer or misuse of this product.
Any attempt to dismantle, change or modify this product in any manner.
Warning
WAKE SLEEP POWER
Batt.Low
This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions
(1)This device may not cause harmful interference and 
(2)This device must accept any interference received, including interference that 
may cause undesired operation 

You are cautioned that changes or modifications not expressly approved by the 
party responsible for compliance could void your authority to operate the 
equipment.