Datasheet

MICRO
SWITCHES
MICRO
SWITCHES
58
SPECIFICATIONS
DIMENSIONS
Unless otherwise specified, a tolerance of ±0.4mm applies to all dimensions.
Contact Resistance (initial)
Max. 300mΩ
Measured by ohm meter - open voltage < 1VDC, driver current -100 mA
Insulation Resistance (at 250VDC/minute)
Min. 100MΩ
Dielectric Strength
1000VAC ( 50~ 60Hz )
Operating Temperature Range
SM1-06/10/16/P1 series -40℃ to 125℃ (with no icing)
SM1-C5/C3/C1 series -40℃ to 85℃ (with no icing)
Vibration
10~55Hz, displacement 0.75 mm (p-p)
Electrical Service Life
Min. 10,000 operations
Electrical Operating Frequency
10~30 operations per minute
Mechanical Service Life
SM1-C5/-06 series(S/L/D force) Min. 10,000,000 operations
SM1-10 series(S force) Min. 1,000,000 operations
All series for H force No define the life
Mechanical Operating Frequency
120 operations per minute
APPLICATIONS
Telephone, Air Conditioner, Computer, Humidifier, Alarm, Time Recorder,
Mixer & Chopper, Solder Gun, Neon Phone, Fax Machine, Joystick,
Water Pump, Gas Detector, Pencil Sharpener, Money Sorter, Food
Processor, Electric Knife, Toy Car, Juice Maker, Electric Steak Pan.
CONTACT CONFIGURATION
MOUNTING HOLES
CERTIFICATE INFORMATION
THE SELECTION OF RATING & FORCE
COM.
NC.
NO.
Model
Name
UL, cUL ENEC14
SM1-P1
0.1A 125/250VAC(Temp:125℃ )
Min. 10,000 operations
0.1A 125/250VAC,μ40T125 1E4
SM1-06
6A 125/250VAC(Temp:125℃ )
Min. 10,000 operations
6A 125/250VAC,μ40T125 1E4
6(2)A 125/250VAC,μ40T125 1E4
SM1-10
10.1A
125/250VAC(Temp:125℃ )
Min. 10,000 operations
10.1A 125/250VAC,μ40T125 1E4
6(2)A 125/250VAC,μ40T125 1E4
SM1-16
16A 125/250VAC(Temp:65℃ )
Min. 6,000 operations
16.1A 125/250VAC,μ40T125 1E4
6(3)A 125/250VAC,μ40T125 1E4
SM1-C5
5A 125/250VAC(Temp:85℃ )
Min. 10,000 operations
5A 125/250VAC,μT85 1E4
SM1-C3
3A 125/250VAC(Temp:85℃ )
Min. 10,000 operations
3A 125/250VAC,μT85 1E4
SM1-C1
0.1A 125/250VAC(Temp:85℃ )
Min. 10,000 operations
0.1A 125/250VAC,μT85 1E4
MODEL Rating D L S H
SM1
0.1A * * * *
3A * * * *
5 A * * * *
6 A * * * *
10A * *
16A *
6.4
2.9
2.4
2.5
1.9
5.1
8.8
Φ2.5
9.5
7.3
Φ2.4
－0
＋0.1
2.0
12.7
19.8
C0.4
0.6
1.6
3.2
6.4
9.5
OP
FP
PT
3.2
10.6
COM
NO
NC
9.5±0.1
16.1
8.8
5.25
9.5±0.13.25
3-1.35 to 1.5 dia.
2-2.4 dia. mounting holes
or M2.3 screw holes.
Plunger
position
COM. NO. NC.
PCB Terminal
NOTE：The Symbol " ＊ " to represent the result is accepted
SM1 SERIES
internal snap-fit lever