MSDS

POLYONE CORPORATION
MATERIAL SAFETY DATA SHEET
GEON E1501 EX BEIGE 3592
Version Number 1.4
Revision Date 05/08/2012
Page 3 of 8
Print Date 5/10/2012
3/8
13 of this MSDS for proper disposal methods.
7. HANDLING AND STORAGE
Handling
:
Take measures to prevent the build up of electrostatic charge. Heat
only in areas with appropriate exhaust ventilation. Processing fume
condensates may contain combustible or toxic residue. Periodically
clean hoods, ducts, and other surfaces to minimize accumulation of
these materials.
Storage
:
Keep containers dry and tightly closed to avoid moisture absorption
and contamination. Keep in a dry, cool place.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Respiratory protection
:
No personal respiratory protective equipment normally required. If
dusty conditions occur wear appropriate respiratory protection.
Eye/Face Protection
:
Safety glasses with side-shields
Hand protection
:
Protective gloves
Skin and body protection
:
Long sleeved clothing
Additional Protective
Measures
:
Safety shoes
General Hygiene
Considerations
:
Handle in accordance with good industrial hygiene and safety
practice. Wash hands before breaks and at the end of workday. This
product may contain residual vinyl chloride monomer (VCM) (CAS
number 75-01-4) below 8.5 ppm (0.00085%). It is unlikely, under
normal working conditions with adequate ventilation, that the
exposure limits will be exceeded for residual VCM. However, the
user should take the necessary precautions (e.g. mechanical
ventilation, local exhaust ventilation, air-monitoring, respiratory
protection, etc.) to ensure airborne levels of any vapors including
VCM or dusts that may be released during heating or processing are
below regulated levels.
Engineering measures
:
Heat only in areas with appropriate exhaust ventilation. Provide
appropriate exhaust ventilation at machinery.
Exposure limit(s)