User manual

22
2. Brightness adjustment
There are 5 options: 1, 2, 3, 4, 5. The higher the level is, the brighter the LCD is.
Click the corresponding to icon to set.
Calibrate
When the touch screen position is not accurate, recalibrate with this function.
After the player enters this mode, touch the center of calibration sign + to calibrate.
Power Off Setting
Sleep time: click and to set.
There are 6 options: off, 10 minutes, 15 minutes, 30 minutes, 60 minutes and 120 minutes. The
setting will change to the default value “Off” if re-start the player.
Default Settings
After the player enters this mode, the player will prompt an auto warning about whether to restore
system default setting or not.
Click “Ok” to restore factory default settings. Click “Cancel” to abandon this restoration.
Upgrade
After clicking this icon, the player will enter “hardware upgrading” warning interface. At this
point, connect the player to the USB port of a PC to update the firmware of the player. Touch
“cancel” on the screen to abort this upgrading.
Other Settings
Format device: click “format system disk” or “format card” to start formatting, and the selected
item will become blue color. The system will pop up a confirmation box as follows: