User manual

28
Taking pictures: in the video interface under viewfinder mode, directly click the icon to
take pictures, and at the same time picture files are saved under the specified directory.
Previewing pictures: upon completion of storage, pictures are displayed in thumbnail icons at the
bottom of the interface; click icon to switch between thumbnails, and double click the
thumbnail icon of the pictures to start preview.
Notices
1. To convert files of RealPlay, QuickTime or MPEG2 formats, please first install appropriate
decoder.
2. To convert files of RealPlay, QuickTime or MPEG2 (DVD) formats, if the files cannot be
directly played with the Windows Media Player in the PC, then an appropriate decoder for the
Windows Media Player shall be installed. Until the files can be played properly with the Windows
Media Player can proper conversion be completed, or this tool will not run properly.
3. This tool cannot be used to produce sound or display Chinese characters in the AVI video file
converted from Flash animation (SWF file).
Firmware Upgrade
This player provides with firmware upgrading tool to upgrade or repair the firmware in the player.
1. Down load the latest firmware.
2. Connect the player to PC’s USB port correctly; make sure no other movable disks are connected
to the PC at the same time.
3. Run this tool.
If the firmware in the player is in good condition, the tool will shift to firmware upgrading mode;
it displays the information of the player’s firmware such as version etc in the box on the upper left
corner of the tool interface. Click button “Select new version firmware file” to select the firmware
file to be upgraded. After the firmware file detected to be correct by the tool, it displays the
information of the selected firmware such as version etc in the box on the upper right corner of the
tool interface. Now click button “Start upgrading” to upgrade the firmware. If the internal
firmware of the player has been damaged, the tool will change to firmware restoration mode. The
version information of the player’s internal firmware now will not be displayed in the box on the
upper left corner of the software interface. It requires the user to select a correct firmware file to
repair the damaged one. At the same time, the information such version etc of the firmware file to
be repaired is displayed in the box on the upper right corner of the interface; click button “Start
upgrading” to upgrade the firmware.