Installation Guide
© 2020. ACT, ColorTrip, DeepScan, LoLevel, MetalliWarning, SpotLite, SuperScan, Target Control, TC, WireWarning, and Zircon are all trademarks or registered trademarks of Zircon Corporation • GF-4453 Rev A 11/20 For a complete list of applicable patent(s) or pending patent(s), visit www.zircon.com/trademarks-patents/
Featuring new, revolutionary Target Control
™
(TC
™
) Level 1 Technology. The Zircon
®
SuperScan
™
M3 advanced
wall scanner is tuned to find clean, wood studs while filtering out metallic false positive objects, such as
plumbing, conduit, straps, brackets, or ducts, hiding behind surfaces. The LoLevel
™
and MetalliWarning
™
Indicators alert to the presence of dangerous, deep, less dense false positives, and metal targets, reducing the
chance of accidentally drilling into a piece of metal or plastic pipe. With the addition of Metal Scan mode, users
can interactively narrow and map metal in walls, making for a more robust and multifunctional tool.
The SuperScan
™
M3 offers four distinct detection modes - TC
™
, StudScan, DeepScan
®
, and Metal Scan.
A 3-mode switch makes it easy to toggle between functions, while the ColorTrip
®
Display conveniently details
information. The screen will illuminate pale blue in TC
™
mode and indicate the center, edges, and direction of
wood studs, while enabling the user to identify ‘safe-to-drill’ zones by utilizing the new ‘Trust but Verify’
technique. When TC
™
mode is off, the tool will perform in StudScan mode indicating both wood and metal studs.
DeepScan
®
mode doubles the scanning depth to find wood and metal studs beneath extra layers of drywall or
paneling. A dedicated Metal Scan mode helps users detect ferrous metal, such as rebar, and non-ferrous metal,
such as copper. The Target Spotlight illuminates on screen and the SpotLite
®
Pointer shines on the surface being
scanned when the target object is found.
• NEW! – Target Control
™
(TC
™
)
Mode locates the center, edges, and direction of wood studs, and not
metal, up to ¾ in. (19 mm) deep behind surfaces. Identifies ‘safe-to-drill’ zones between adjacent drywall
screws, nails, and protector plates
• StudScan Mode locates center, edges, and direction of wood and metal studs up to ¾ in. (19 mm) deep
• DeepScan
®
Mode doubles the scan depth of wood and metal studs up to 1½ in. (38 mm) deep
• Metal Scan Mode locates ferrous metal up to 3 in. (75 mm) deep and non-ferrous metal
up to 1½ in. (38 mm) deep
• WireWarning
®
Detection alerts to live, unshielded AC wires up to 2 in. (50 mm) deep
• LoLevel
™
Indicator displays low (weak) signal objects, such as plastic water pipes, while in TC
™
mode
• Signal Strength Indicator helps distinguish between shallow and deep targets while in StudScan
and DeepScan
®
modes
• MetalliWarning
™
Indicator turns on when metal is detected in TC
™
, StudScan, and DeepScan
®
modes
• ACT
™
(Auto Correcting Technology) automatically corrects common errors, such as when scanning begins
over a stud
• Target Spotlight illuminates on screen when target is detected
• ColorTrip
®
Display illuminates pale blue in TC
™
mode, green in DeepScan
®
mode, blue in Metal Scan mode,
and red to alert to the presence of live AC electricity
• SpotLite
®
Pointer shines an arrow-shaped light on the scanned surface to indicate the target location
• “V” marker groove enables accurate marking of target location
• Low Battery Indicator for optimum performance (9V battery required, not included)
|
zircon.com
Stud Finder
1580 Dell Avenue
|
Campbell, CA 95008
|
info@zircon.com
T: 1.408.963.4550
|
F: 1.408.963.4597
SuperScan
™
M3
|
Advanced Wall Scanner
WireWarning
®
Detection
DeepScan
®
Mode
Metal Scan/MetalliWarning
™
Indicator
LoLevel
™
/Signal Strength Indicator
Stud Center Finding
Target Control
™
Technology
Dimensions 7.9 in. x 3.5 in. x 1.9 in. (200 mm x 89 mm x 48 mm)
Weight
8.0 oz. (226 g) (no battery)
Battery Type
9V alkaline battery required, not included
Position Accuracy
Up to a depth of ¾ in. (19 mm) typically, within
1
⁄8 in. (3 mm)
Depth
Target Control
™
mode: up to ¾ in. (19 mm)
StudScan mode: up to ¾ in. (19 mm)
DeepScan
®
mode: up to 1½ in. (38 mm)
Metal Scan mode: up to 3 in. (75 mm) deep for ferrous metal
and up to 1½ in. (13 mm) deep for non-ferrous metal
WireWarning
®
Position Accuracy
Typically, 120-230V at 50-60Hz within 6 in.
(150 mm) of hot unshielded wire in drywall
WireWarning
®
Depth
Up to 2 in. (50 mm) deep
Operating Temperature
40° to 120°F (4° to 49°C)
Storage Temperature
20° to 140°F (-7° to 60°C)
Humidity
5-95% RH (non-condensing)
Water Resistance
Splash and water resistant, not waterproof
*NOTE: USE ONLY IN ACCORDANCE WITH SUPERSCAN
TM
M3 INSTRUCTIONS.
See tool’s instructions for more information. Sensing depth and accuracy can vary due to
moisture, content of materials, wall texture, paint, etc. Indoor use only.
Specifications