Owner's Manual

RCR Components
Remote Commander Components
Setting Up
Set the RCR up on a firm base or mount it
onto a tripod with a 5/8-11 thread.
Adjusting horizontal settings
Start adjusting the level bubble vial X by
turning the levelling screws (A) and (B).
X-vial
Always look vertically at the vial in order to
avoid reading errors. Now turn the levelling
screw (C) to adjust the bubble vial Y.
Y-vial
Repeat the whole action as necessary.
Adjusting vertical settings
Set the RCR up vertically on its integrated
handles or mount the RCR onto a tripod.
Now adjust only the vertical bubble level
vial (Z) with the levelling screw (C).