Owner's Manual

Operation
Switch on RCR:
Press and hold the "On/Off" button for
1 second until the head of RCR starts
rotating. The rotation mode is
activated.
Spot mode:
The rotating laser sends out a spot
laser beam that can be focused on one
point. In order to get into the spot
mode, reduce the speed by pressing
the minus button to zero.
To rotate laser
Change its position by manually
turning the rotary head
Rotate laser with Remote
Commander
Change position by pressing the
Position Selector buttons.
Scan mode
Scan Mode is a light-intensive segment
of line at user-selected width, with an
adjustable position.
To activate Scan Mode, press the
ACTIVATE button on the control panel or
on the Remote Commander control
panel.
To change scan angle, press the + and -
buttons on either control panel.
To change position of the scan area,
manually turn the rotary head, or use
the Change Position buttons on the
Remote Commander.
Rotation mode
A laser beam rotating 360° with a speed
of up to 120 rpm, or 550 rpm if using
receiver.
Using either control panel, activate
Rotation Mode by pressing the spin
button.
Change rotation speed by pressing the +
or - buttons.
Operation