B AT T E R Y C H AR G E R BATTERY CHARGER BC1 Installation and User Manual
Battery charger BC1 ATTENTION: To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel. Disconnect the mains supply before connecting or disconnecting the links to the battery. Read the Instruction Manual carefully before use. Verify that the selected charge curve is suitable for the type of battery You have to re-charge.
Battery charger BC1 Installation and safety instructions Battery charger BC1 has been designed to provide safety and reliable. It is necessary to observe the following precautions in order to avoid damage to persons and to the battery charger: • Read the installation instructions contained in this Manual carefully. For further information put the Manual in a proper place. • Fix the battery charger to a stable surface through the appropriate holes inserted on the fixing flanges.
Battery charger BC1 LED Indicator 100% 80 % RED LED shows that the battery is in initial charging phase. YELLOW LED shows that the battery charger has reached 80% of charge. GREEN LED shows that the battery has reached 100% of charge. R STA T Further information can be found in the description of the Charging Curve. Example: the RED LED on blinking indicates a constant tension phase.
Battery charger BC1 Mechanical dimensions 75 245 75 45 105 285 N.B. All dimensions are expressed in mm. Drilling details 105 = = 12,5 6 UP 260 285 Advised Installation N.B. All dimensions are expressed in mm.
Battery charger BC1 TECHNICAL FEATURES Ta=25°C unless otherwise specified.
Battery charger BC1 Protection and Safety Description Symbol Test Condition Value and/or Range Unit Insulation - Mains to Battery side 1250 VAC Insulation - Mains side to Earth 500 VDC Insulation - Battery side to Earth 500 VDC Leakage current IL Supplied equipment <3 mA Input fuse F1 Inside the equipment 10 (delayed) A Output fuse F2 Inside the equipment 40 A 1,3 V/cell Protection provided by fuse F2 - 100 °C Minimum output voltage of operation (Battery Detector)
Battery charger BC1 Options with connectors 6 poles Pin Use 1 Common contact net presence 2 Normally closed contact for mains presence 3 Normally opened contact for mains presence 4 Red LED anode 5 Common cathode LED 6 Green LED anode Technical features : exchange contacts 0,3A 125VAC 0,3A 110VDC 1A 30VDC Connector - Diagram connection INSIDE 1 6 5 4 2 3 2 3 1 4 5 6 D01001-02 8
Battery charger BC1 Options with connectors 4 poles and 2 poles Connector 4 poles Pin Use 1 Red LED anode 2 Not used 3 Common cathode LED 4 Green LED anode Connector 2 poles Pin Use 1 Common contact net presence 2 Normally closed contact for mains presence Technical features: exchange contacts 0,3A 125VAC 0,3A 110VDC 1A 30VDC Connector - Diagram connection OUTSIDE INSIDE 1 2 4 3 2 2 2 1 1 LR 1 3 4 LV D01001-02 9
Battery charger BC1 Design, production and sale: ZIVAN SRL Via della Costituzione, 36 42028 Poviglio (RE) ITALIA Tel. +39 0522 960593 Fax +39 0522 967417 info@zivan.it SALES OFFICES ITALY ZAPI SPA Via Parma, 59 42028 Poviglio (RE) Tel. +39 0522 960050 Fax +39 0522 960259 info@zapispa.it FRANCE URMA SARL 30, Rue de Morvan Silic 503 94623 Rungis Cedex Tel. +33 1 45609477 Fax +33 1 46750871 urma@wanadoo.fr SWITZERLAND ASMO ENGINEERING AG Glashütte, 58 CH 4229 Beinwil (SO) Tel.
Battery charger BC1 D01001-02 11
Battery charger BC1 Electric Conversions Distributor of ZIVAN Battery Chargers 215 14th Street, Sacramento CA 95814 Tel. 916-441-4161 Fax 916-444-8190 E-mail: elcon@jps.net Web: www.zivanusa.
