Quick Start Guide

1) In "Trigger Read" work mode, the reader will not read cards before a low level

signal to "Trigger Point" is delivered. "Trigger Point" is mainly used for

working with the ground sensor of vehicle parking system.

2) In "Always Read" work mode, once the card is in the effective range, the

reader will output the card number via Wiegand continually.

3. Technical Parameter

Working Voltage

DC9V ~ 12V

Working Current

1.2A +/-10%

Working Temperature

-20 ℃ ~ +60 ℃

Working Humidity

<95%(+25°C)

Interface Protocol

EPC global UHF Class 1Gen2/ ISO 18000-

6C,ISO

18000-6B

Working Frequency

865MHz~868MHz;920MHz~925MHz

Output Power

10dBm ~ 33dBm

Communication Interface

Wiegand 26/34; USB

Reading Distance

Stable 18 meters

Atenna Gain

9dBI

Dimension

310mm*310mm*90mm(±5mm)

Length of cable

1400±50mm

4. Safety Precautions

1) The reader working voltage ranges from DC9V to DC16V, it is recommended

to use DC12V /3A power supply.

2) Please wire according to the cable definition.

5. Modifying Setting via Demo