Quick Start Guide

4
Demo Using Instructions
 Connect the USB port of the reader to the USB port of the computer.
 It is recommended to use power adapter with DC12V/3A specifications.
 To play Demo in computer, click “Connect”, on the right side of the middle
will show “Successfully Connected”.
 Wiegand Output Time: Sets the time interval between adjacent wiegand
data.
 Reader Indicate: Set whether the buzzer rings when the machine is on
the electricity and brush the card.
 Work Mode: Set the working mode of the machine, and including always
read mode, trigger mode. Under trigger mode, time of reading card can be
set when it is triggered once.
 RF Setting: Set the RF parameters of the machine, including power,
spectrum. Power range is 10~33dBm.
 Wiegand Format: Set the machine's wiegand output format.
 Wiegand Output Settings: Sets the forward or reverse output of the
machine's Wiegand Data, and start output from the first few bytes.
 Tag Reading Interval:
Set the machine to read the card interval. Read card
interval is the time when from the card is read within the scope of the card
to the card is left out of the scope of the card to read the second time card.
Work Mode
Read Always
Communication Interface
Wiegand26
Output Power
33dBm
Working Frequency
UHF 6E Pro: 865MHz ~ 868MHz;
UHF 6F Pro: 920MHz ~925MHz