User's Manual
Table Of Contents
- Safety Measures
- 1 Instruction for Use
- Main Menu
- 3 User Management
- 4 User Role
- 5 Communication Settings
- 6 System Settings
- 7 Personalize Settings
- 8 Data Management
- 9 Access Control
- 10 USB Manager
- 11 Attendance Search
- 12 Work Code
- 13 Autotest
- 14 System Information
- 15 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
- Appendix 3
EFace10 User Manual
Page | 31 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be
restored, but the device date and time cannot be restored.
NOTE: For example, the user sets the time of the device (18:35 on March 15, 2019) to 18:30 on January 1,
2020. After restoring the factory settings, the time of the equipment will remain 18:30 on January 1, 2020.
Attendance 6.2
Click Attendance on the System interface.
Function Description
Function Name Description
Duplicate Punch
Period(m)
Within a set time period (unit: minutes), the duplicated attendance record will
not be reserved (value ranges from 1 to 999999 minutes).
Camera Mode
Choose whether to capture and save the current snapshot image during
verification. There are 5 modes:
No Photo: No photo is taken during user verification.
Take photo, no save: Photo is taken but not saved during verification.
Take photo and save: Photo is taken and saved during verification.
Save on successful verification: Photo is taken and saved for each successful
verification.
Save on failed verification: Photo is
taken and saved only for each failed
verification.
Display User Photo
Choose whether
to display the user photo when the user passes the
verification.
Attendance Log Alert
When the record space of the attendance reaches the maximum threshold
value, the device automatically displays the memory space warning.
Users may disable the function or set a valid value between 1 and 9999.