User's Manual

Table Of Contents

EFace10 User Manual

Function Description

Function Name Description

Punch State Mode

Off: It disables the punch state function. And the punch state key set under

the Shortcut Key Mappings menu becomes invalid.

Manual Mode: Switch the punch state key manually, and the punch state key

will disappear after Punch State Timeout.

Auto Mode: The punch state key will automatically switch to a specific punch

status according to the predefined schedule which can be set in the Shortcut

Key Mappings.

Manual and Auto Mode: The main interface will display the auto-switch

punch state key. However, the users will still be able to select an alternative

that is the manual attendance status. After timeout, the manual switching

punch state key will become auto-switch punch state key.

Manual Fixed Mode: After the punch state key is set manually to a particular

punch status, the function will remain unchanged until being manually

switched again.

Fixed Mode: Only the manually fixed punch state key is shown. Users cannot

change the status by pressing any other keys.

Shortcut Key Mappings 7.5

Users may define shortcut keys for attendance status and functional keys on the main interface. So, on the

main interface, when the shortcut keys are pressed, the corresponding attendance status or the function

interface displays directly.

Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys.

 On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the

shortcut key settings.

 On the Shortcut Key (that is “Up Key”) interface, tap function to set the functional process of the

shortcut key either as punch state key or function key.

 If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration

is done as shown in the image below.