User's Manual
Table Of Contents
- Safety Measures
- 1 Instruction for Use
- Main Menu
- 3 User Management
- 4 User Role
- 5 Communication Settings
- 6 System Settings
- 7 Personalize Settings
- 8 Data Management
- 9 Access Control
- 10 USB Manager
- 11 Attendance Search
- 12 Work Code
- 13 Autotest
- 14 System Information
- 15 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
- Appendix 3
EFace10 User Manual
Page | 7 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Safety Measures
The below instructions intend to ensure that the user can use the product correctly to avoid danger or
property loss. The following precautions are to keep the user’s safety and prevent any damage. Please read
carefully before installation.
1. Read, follow, and retain instructions - All safety and operational instructions must be properly
read and followed before bringing the device into service.
2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions.
3. Accessories - Use only manufacturer-recommended or product-sold accessories. Please do not
use any other components other than manufacturer suggested materials.
4. Precautions for the installation – Do not place this device on an unstable stand or frame. It may
fall and cause serious injury to persons and damage to the device.
5. Service - Do not try to service this unit yourself. Opening or removing covers may expose you to
hazardous voltages or other hazards.
6. Damage requiring service - Disconnect the system from the main AC or DC power source and
refer service personnel under the following conditions:
When cord or connection control is affected.
When any liquid is spilled, or an item dropped into the system.
If exposed to water and/or an inclement weather (rain, snow, and more).
If the system is not operating normally under operating instructions.
Just change controls defined in operating instructions. Improper adjustment of the controls may
result in damage and involve a qualified technician to return the device to normal operation.
7. Replacement parts - When replacement parts are needed, service technicians must only use
replacement parts provided by the supplier. Unauthorized substitutes can result in a burn, shock,
or other hazards.
8. Safety check - On completion of service or repair work on the unit, ask the service technician to
perform safety checks to ensure proper operation of the unit.
9. Power sources - Operate the system only from the label's power source form. If the sort of power
supply to use is unclear, call your dealer.
10. Lightning - External lightning conductors can be installed to protect against electrical storms. It
stops power-ups from destroying the system.
NOTE: The devices should be installed in areas with limited access.