User's Manual

4-inch Visible Light Terminal User Manual
Page | 39 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
• When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo.
Add WIFI Network Manually
The WIFI can also be added manually if the required WIFI is not displayed on the list.
NOTE: After successfully adding the WIFI manually, follow the same process to search for the added WIFI
name. Click here to view the process to search the WIFI network.
WIFI Enabled: Tap on the required
network from the searched network list.
Tap on the password field to enter the
password, and then tap on Connect to
WIFI (OK).
Tap on Add WIFI Network to add the WIFI
manually.
On this interface, enter the WIFI network
parameters. (The added network must