User's Manual

4-inch Visible Light Terminal User Manual
Page | 41 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name
Description
Enable
Domain
Name
Server Address
Once
this function is enabled, the domain name mode “http://...”
will be used, such as http://www.XYZ.com, while “XYZ” denotes the
domain name (when this mode is turned ON).
Disable
Domain
Name
Server Address
IP address of the ADMS server.
Server Port
Port used by the ADMS server.
Enable Proxy Server
When you choose to enable the proxy, you need to set the IP
address and port number of the proxy server.
HTTPS
Based on HTTP, transmission encryption
and identity
authentication ensure the security of the transmission process.
Wiegand Setup 6.6
To set the Wiegand input and output parameters.
Tap Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters.
6.6.1 Wiegand Input