User's Manual

Table Of Contents

4-inch Visible Light Terminal

User Manual

15 Connect to ZKBioAccess Software

Set the Communication Address 15.1

 Device side

1. Tap COMM. > Ethernet in the main menu to set the IP address and gateway of the device.

(Note: The IP address should be able to communicate with the ZKBioAccess server, preferably in

the same network segment with the server address)

2. In the main menu, click COMM. > Cloud Server Setting to set the server address and server port.

Server address: Set the IP address as of ZKBioAccess server.

Server port: Set the server port as of ZKBioAccess(The default is 8088).