User's Manual

Table Of Contents

4-inch Visible Light Terminal

User Manual

1 Safety Measures

The following precautions are to keep the user’s safety and prevent any damage. Please read

carefully before installation.

1. Read, follow, and retain instructions - All safety and operational instructions must be properly

read and followed before bringing the device into service.

2. Do not ignore warnings - Adhere to all warnings on the unit and in the operating instructions.

3. Accessories - Use only manufacturer-recommended or product-sold accessories. Accessories not

recommended by the manufacturer must not be used.

4. Precautions for the installation – Do not place this device on an unstable stand or frame. It may

fall and cause serious injury to persons and damage to the device.

5. Service - Do not try to service this unit yourself. Opening or removing covers may expose you to

hazardous voltages or other hazards.

6. Damage requiring service - Disconnect the system from the main AC or DC power source and

refer service personnel under the following conditions:

• When cord or connection control is affected.

• When the liquid was spilled, or an item dropped into the system.

• If exposed to water and/or inclement weather (rain, snow, and more).

• If the system is not operating normally under operating instructions.

Just change controls defined in operating instructions. Improper adjustment of other controls may

result in damage and involve a qualified technician to return the device to normal operation.

7. Replacement parts - When replacement parts are needed, service technicians must only use

replacement parts provided by the supplier. Unauthorized substitutes can result in a burn, shock,

or other hazards.

8. Safety check - On completion of service or repair work on the unit, ask the service technician to

perform safety checks to ensure proper operation of the unit.

9. Power sources - Operate the system only from the label's power source form. If the sort of power

supply to use is unclear, call your dealer.

10. Lightning - External lightning conductors can be installed to protect against electrical storms. It

stops power-ups destroying the system.

The devices should be installed in areas with limited access.