User's Manual

4-inch Visible Light Terminal User Manual
Page | 30 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
• When a user registered with a photo passes the authentication, the registered photo will be
displayed.
• Tap User Photo, the device’s camera will open, then tap the camera icon to take a photo. The
captured photo is displayed on the top left corner of the screen and the camera opens up again to
take a new photo, after taking the initial photo.
Note: While registering a face, the system automatically captures a photo as the user photo. If you do not
register a user photo, the system automatically sets the photo captured while registration as the default
photo.
4.1.8 Access Control Role
The Access Control Role sets the door access privilege for each user. This includes the access group,
verification mode and also facilitates to set the group access time-period.
• Tap Access Control Role > Access Group, to assign the registered users to different groups for
better management. New users belong to Group 1 by default and can be reassigned to other
groups. The device supports up to 99 Access Control groups.
• Tap Time Period, to select the time period to use.