User's Manual
Table Of Contents
4-inch Visible Light Terminal
User Manual
Page | 38 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name
Descriptions
Comm Key
The default password is 0, which can be changed.
The Comm Key can contain1-6 digits.
Device ID
Identity number of the device, which ranges between 1 and 254.
If the communication method is RS232/RS485, you need to input this device ID
in the software communication interface.
Wireless Network
★
6.4
The device provides a Wi-Fi module, which can be built-in within the device mould or can be externally
connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and establishes a wireless network
environment. Wi-Fi is enabled by default in the device. If you don't need to use the Wi-Fi network, you can
toggle the Wi-Fi to disable button.
Tap Wireless Network on the Comm. Settings interface to configure the WiFi settings.
Search the WIFI Network
• WIFI is enabled in the Device by default. Toggle on button to enable or disable WIFI.
• Once the Wi-Fi is turned on, the device will search for the available WIFI within the network range.
• Tap on the appropriate WiFi name from the available list, and input the correct password in the
password interface, and then tap Connect to WIFI (OK).