User's Manual

Table Of Contents

4-inch Visible Light Terminal

User Manual

Shortcut Key Mappings 8.5

Users may define shortcut keys for attendance status and for functional keys which will be defined on the

main interface. So, on the main interface, when the shortcut keys are pressed, the corresponding

attendance status or the function interface will be displayed directly.

Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys.

• On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the

shortcut key settings.

• On the Shortcut Key (that is “F1”) interface, tap function to set the functional process of the

shortcut key either as punch state key or function key.

• If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration

is completed as shown in the image below.

• If the Shortcut key is set as a punch state key (such as check in, check out, etc.), then it is required

to set the punch state value (valid value 0~250), name.

Set the switch time

• The switch time is set in accordance with the punch state options.

• When the punch state mode is set to auto mode, the switch time should be set.

• On the Shortcut Key interface, tap Set Switch Time to set the switch time.