User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 20 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
2. Enable temperature screening with infrared
When Enable temperature screening with infrared function is on, the user's body temperature is
measured before the verification process begins. During the user verification process, the user's face
must be aligned with the temperature measurement area to measure the body temperature. It displays
the measured temperature either in value or in the normal/abnormal temperature range. The following
are the popups of the verification result prompt interface.
Tap System >Detection Management > Display Body Temperature to set the display mode of body
temperature.
NOTES:
1. This function is only applicable to products with temperature measurement modules.
2. A green thermometer icon represents normal body temperature, while an orange
thermometer icon represents abnormal body temperature.