User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 31 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
5.1.5 Profile Photo
Tap on Profile Photo in the New User interface to go to the Profile Photo registration page.
• When a user registered with a photo authenticates successfully, the user's registered photo is
displayed.
• Tap Profile Photo to open the device’s camera, then tap the camera icon to take a photo. The
captured photo is displayed on the top left corner of the screen and the camera opens up again to
take another photo, after taking the initial photo.
NOTE: While registering a face, the system automatically captures a picture as a profile photo. If you do
not register a profile photo, the system automatically sets the picture captured while registration as the
default photo.
5.1.6 Access Control Role
The Access Control Role sets the door access privilege for each user. It includes the access group,
verification mode and also facilitates setting the group access time-period.
• Tap Access Control Role > Access Group to assign the registered users to different groups for
better management. New users belong to Group 1 by default and can be reassigned to other groups.
The device supports up to 99 Access Control groups.
• Tap Time Period, to select the time to use.