User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 40 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Tap Wireless Network on the Comm. Settings interface to configure the Wi-Fi settings.
Searching the Wi-Fi Network
• WIFI is enabled in the device by default. Toggle the button to enable or disable WIFI.
• Once the Wi-Fi is turned on, the device will search for the available Wi-Fi within the network range.
• Tap on the required Wi-Fi name from the available list and input the correct password in the
password interface, and then tap Connect to WIFI (OK).
• When the WIFI is connected successfully, the initial interface will display the Wi-Fi logo.
WIFI Enabled: Tap on the required
network from the searched
network list.
Tap on the password field to enter
the password and tap on Connect
to WIFI (OK).