User's Manual

RevFace15[TI] User Manual
Page | 58 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Menu Screen
Timeout (s)
When there is no operation, and the time exceeds the set value, the device
automatically goes back to the initial interface.
The function can either be disabled or set the required value between 60 and
99999 seconds.
Idle Time To Slide
Show (s)
When there is no operation, and the time exceeds the set value, a slide show is
displayed. The function can be disabled, or you may set the value between 3
and 999 seconds.
Slide Show Interval
(s)
It is the time interval in switching between dif
ferent slide show pictures. The
function can be disabled, or you may set the interval between 3 and 999
seconds.
Idle Time to Sleep
(m)
If the sleep mode is activated, and when there is no operation in the device,
then the device will enter standby mode.
This function can be disabled or set a value within 1-999 minutes.
Main Screen Style
The style of the main screen can be selected according to the user preference.
Company Name
Enter the company name here. When the company name option is turned on in
the print information setting, the company name is printed.
Voice Settings 9.2
Tap Voice on the Personalize interface to configure the voice settings.
Function Description
Function Name Description
Voice Prompt
Toggle to enable or disable the voice prompts during function operations.
Touch Prompt
Toggle to enable or disable the keypad sounds.
Volume
Adjust the volume of the device which can be set between 0-100.
Bell Schedules 9.3
Tap Bell Schedules on the Personalize interface to configure the Bell settings.