User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 60 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
Punch States Options 9.4
Tap Punch States Options on the Personalize interface to configure the punch state settings.
Function Description
Function Name Description
Punch State Mode
Off:
Disable the punch state function. Therefore, the punch state key set
under Shortcut Key Mappings menu will become invalid.
Manual Mode: Switch the punch state key manually, and the punch state key
will disappear after Punch State Timeout.
Auto Mode:
The punch state key will automatically switch to a specific punch
status according to the predefined time schedule which can be set in the
Shortcut Key Mappings.
Manual and Auto Mode: The main interface will display the auto-switch
punch state key. However, the users will still be able to select alternative that
is the manual attendance status. After timeout, the manual switching punch
state key will become auto-switch punch state key.
Manual Fixed Mode: After the punch state key is set manually to a particular
punch status, the function will remain unchanged until being manually
switched again.
Fixed Mode:
Only the manually fixed punch state key will be shown. Users
cannot change the status by pressing any other keys.
Shortcut Key Mappings 9.5
Users may define shortcut keys for attendance status and for functional keys which will be defined on the
main interface. So, on the main interface, when the shortcut keys are pressed, the corresponding
attendance status or the function interface will be displayed directly.
Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys.