User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 61 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
• On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the
shortcut key settings.
• On the Shortcut Key (that is "F1") interface, tap function to set the functional process of the
shortcut key either as punch state key or function key.
• If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration
is completed as shown in the image below.
• If the Shortcut key is set as a punch state key (such as check in, check out, etc.), then it is required
to set the punch state value (valid value 0~250), name.
Set the switch time
• The switch time is set in accordance with the punch state options.
• When the Punch State Mode is set to Auto Mode, the switch time should be set.
• On the Shortcut Key interface, tap Set Switch Time to set the switch time.
• On the Switch Cycle interface, select the switch cycle (Monday, Tuesday etc.) as shown in the
image below.