User's Manual
Table Of Contents
- Safety Measures
- 2 Overview
- 3 Instruction for Use
- Main Menu
- 5 User Management
- 6 User Role
- 7 Communication Settings
- 8 System Settings
- 9 Personalize Settings
- 10 Data Management
- 11 Access Control
- 12 Attendance Search
- 13 Print Settings
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBioAccess IVS Software
- Appendix 1
- Appendix 2
RevFace15[TI] User Manual
Page | 65 Copyright©2021 ZKTECO CO., LTD. All rights reserved.
11 Access Control
On the Main Menu, tap Access Control to set the schedule of the door opening, locks control and to
configure other parameters settings related to access control.
To gain access, the registered user must meet the following conditions:
• The relevant door’s current unlock time should be within any valid time zone of the user’s time
period.
• The corresponding user’s group must be already set in the door unlock combination (and if there
are other groups, being set in the same access combo, then the verification of those group’s
members is also required to unlock the door).
• In default settings, new users are allocated into the first group with the default group time zone,
where the access combo is "1" and is set in unlock state by default.