User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 102 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Alarm on Password
When a user uses the password verification
method, an alarm signal will
be generated,
otherwise there will be no alarm signal.
Alarm on 1:1 Match
When a user uses the 1:1 verification method, an
alarm signal will be generated, otherwise there
will be no alarm signal.
Alarm on 1:N Match
When a user uses the 1:N verification method, an
alarm signal will be generated, otherwise there
will be no alarm signal.
Alarm Delay (s)
Alarm signal will not be transmitted until the
alarm delay time is elapsed. The value ranges
from 1 to 999 seconds.
Duress Password
Set the 6-
digit duress password. When the user
enters this duress password for verification, an
alarm signal will be generated.