User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 83 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Punch State Mode
Off:
Disable the punch state function. Therefore,
the punch state key set under Shortcut Key
Mappings menu will become invalid.
Manual Mode:
Switch the punch state key
manually, and the punch state key will disappear
after Punch State Timeout.
Auto Mode: The pu
nch state key will
automatically switch to a specific punch status
according to the predefined time schedule which
can be set in the Shortcut Key Mappings.
Manual and Auto Mode: The main interface will
display the auto-
switch punch state key.
However, the
users will still be able to select
alternative that is the manual attendance status.
After timeout, the manual switching punch state
key will become auto-switch punch state key.
Manual Fixed Mode: After the punch state key is
set manually to a particular punch status, the
function will remain unchanged until it is being
manually switched again.
Fixed Mode:
Only the manually fixed punch
state key will be shown. Users cannot change the
status by pressing any other keys.