User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 85 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
If the Shortcut key is set as a punch state key (such as check in, check out,
etc.), then it is required to set the punch state value (valid value 0~250),
name.
Set the Switch Time
The switch time is set in accordance with the punch state options.
When the Punch State Mode is set to Auto Mode, the switch time
should be set.
On the Shortcut Key interface, tap Set Switch Time to set the switch
time.
On the Switch Cycle interface, select the switch cycle (Monday, Tuesday,
etc.) as shown in the image below.