User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 90 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
12 Access Control
On the Main Menu, tap Access Control to set the schedule of the door
opening, locks control and to configure other parameters settings related to
access control.
To gain access, the registered user must meet the following conditions:
1. The relevant door’s current unlock time should be within any valid time
zone of the user’s time period.
2. The corresponding user’s group must be already set in the door unlock
combination (and if there are other groups, being set in the same access
combo, then the verification of those group’s members is also required to
unlock the door).
3. In default settings, new users are allocated into the first group with the
default group time zone, where the access combo is "1" and is set in
unlock state by default.