User's Manual
Table Of Contents
- 1 Safety Measures
- 2 Electrical Safety
- 3 Operation Safety
- 4 Instruction for Use
- 5 Main Menu
- 6 User Management
- 7 User Role
- 8 Communication Settings
- 9 System Settings
- 10 Personalize Settings
- 11 Data Management
- 12 Access Control
- 13 Attendance Search
- 14 Autotest
- 15 System Information
- 16 Connect to ZKBio Access Software
- Appendix 1
- Appendix 2
- Eco-friendly Operation
SpeedFace-V3L User Manual
Page | 92 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Door Sensor Delay (s)
If the door is not locked and is left open for a
certain duration (Door Sensor Delay), an alarm
will be triggered.
The valid value of Door Sensor Delay ranges from
1 to 255 seconds.
Door Sensor Type
There are three Sensor types: None, Normal
Open, and Normal Closed.
None: It means the door sensor is not in use.
Normally Open: It means the door is always left
open when electric power is on.
Normally Closed: It means the door is always left
closed when electric power is on.
Verification Mode
The
supported verification mode includes
Password/Fingerprint/Card/
Face, Fingerprint
Only, User ID Only, Password,
Card Only,
Fingerprint/Password, Fingerprint/Card, User ID +
Fingerprint, Fingerprint + Password, Fingerprint +
Card, Fingerprint + Password + Card, Password +
Card, Password/Card, User ID + Fingerprint +
Password, Fingerprint + (Card/User ID), Face Only,
Face + Fingerprint, Face + Password, Face + Card,
Face + Fingerprint + Card,
Face + Fingerprint +
Password.
Door Available Time
Period
It sets the timing for the door so that the door is
accessible only during that period.