User's Manual

User Manual
P a g e | 8 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
2 Installation Set-up
2.1 Installation Environment
2.2 Installation Steps
Make sure that the device is installed as per the installation instructions. Otherwise, you will bear any
consequence resulting from your actions.
The device supports two installation methods: wall-mounted installation and desktop installation. Users
can choose according to actual needs.
Mode 1: Wall-mounted Installation
Step1: Find a suitable indoor installation location, the recommended installation height is 59.1 inches
(1.5m), which can be adjusted as needed.
Step2:
Attach the mounting template stickers to the wall and drill holes, then fix the back plate on the wall
with the wall mounting screws.
Step3:
Finally, push the device into the back plate and secure it to the back plate.