Operation Instructions
1.Diagram
2. Keys and Operation Instructions
1. Indicator (alar ery
2. Volume hole
3. Key combination
4. Handle
5. USB port
6. Battery cover
7. Detection area
8. Battery cover screw
9. Hole for hanging rope
LowSensitivity
MiddleSensitivity HighSensitivity
Power Key
Key to switch between Sound & Vibration
Power Key: Long press to power on, and in working state long
press it to power off. The power indicator flashes once in every
3 seconds in working state.
Sound & Vibration key: Press this key to switch between
“Sound” >“ Vibration” >“ Sound and Vibration” mode. When the
indicator doesn’t flashes, it indicates sound and light alarm
mode. When it flashes once in every 3 seconds, it indicates the
vibration and light alarm mode. When it flashes once every 1.5
seconds, i ti ndicates t he s ound, v ibration a nd l ight a larm m ode.
Sensitivity Key: The sensitivity is divided into 4 levels; low,
medium, high, and super high. Select low, medium or high
sensitivity by pressing the corresponding sensitivity key, the
corresponding indicator flashes once in every 3 seconds. To
switch to super high sensitivity, select a sensitivity, and press
the s ensitivity k ey a gain. T hree s ensitivity i ndicators w on’t fl ash.
This detector has illuminated keys, which indicates its working
state.
1
2
3
4
5
6
7
8
-1- -2-
4.IndicatorInstructions
Alarm indicator: Divided into 4 intensity levels, the larger or
closer the metal is during detection, the higher the alarm level.
Level 1 Level 2 Level 3 Level 4
Low Battery Indicator: The leftmost light flashes quickly when
the power is low.
3.Features
-3-
9
6. Uses AA battery type which is easily available. 70 hours of
continuous . (Pay
attention to the positive and
negative poles while installing
the battery)
4. Sound and light alar .
7. In standby state for more than 2 minutes, it will sleep automati-
cally, and in case of more than 10 minutes of inactivity, it will
shut down. Press any button or take it close to any metal to
activate it.
5. T hree alarm modes: V ibration, Sound, vibration and sound.
1. Digital design and strong anti-interference ability.
2. Easy to use and carry.
3. High sensitivity, Four sensitivity levels.
m
operation
m, low batt )