Quick Start Guide

2. The users will display in [Personnel] > [Temporary Personnel], click [Review].

Ethernet and Cloud Server Settings

Click on > [COMM.] > [Ethernet] to set the network parameters. If the TCP/IP

communication of the device is successful, the icon will be displayed in the

upper right corner of the standby interface.

Click on > [COMM.] > [Cloud Server Setting] to set the server address and server

port, that is, the IP address and port number of the server after the software is

installed. If the device communicates with the server successfully, the icon will be

displayed in the upper right corner of the standby interface.