User's Manual
Table Of Contents
Countertop TA Terminal User Manual 17
Volume: This option is used to adjust the volume of sound. Select a desired volume by pressing .
7.2 Date/Time
This menu item allows you to calibrate the date and time of the device.
Press M/OK on the initial interface.
Select System and press M/OK.
Select Date/Time and press M/OK.
Enter the desired value by using
the keypad. Press M/OK to save.
7.3 Timing State Switching Setting
When it comes the set times, the attendance machine will automatically switch its attendance state. The current
attendance state is shown on the initial interface.
Note: The attendance status is downloaded together with attendance records. Users can view the attendance status
by using attendance software. The attendance status does not affect attendance calculation, which is based on the
preset shift time.
Press M/OK on the initial interface.
Select System and press M/OK.
Select Auto Switch and press M/OK.
Press
▲
/
▼
to select the item and
press M/OK.
Set parameters by referring to the
instructions in the following text
box and press M/OK.
As shown in the preceding
figure, when the time reaches
07:00, the attendance status
switches to Check-In.
Note: The date and time of the
device
must be set accurately to ensure
the accuracy of attendance time.