User's Manual

Quick Start Guide
Countertop TA Terminal (Standard Version)
Version: 1.0
1. Dimensions
1
2
3
2.8 Inch TFT LCD
Speaker
Fingerprint
Sensor
Keypad
USB Host
The images in this manual may differ from the real product.
The real product prevails.
DC Input
(Micro USB port)
Battery Area
3. Communication
We recommend that the indoor communication distance
between the device and the router should be within 20
meters. The number, thickness and location of walls,
ceilings, or other objects between device and the router
may affect the Wi-Fi signal.
WLAN Mode
4. Add User
Press M/OK on the initial interface. Select User and press OK.
Select Add user and press OK.
ID: Enter the user ID.
Name: Use T9 to enter
name(supports 23-character
names).
FP: Place your finger on the
fingerprint collector for three
consecutive times correctly
until enrollment succeeds.
PWD: Enter a 1 to 8 digit
password.
Dept: Select department.
Purview: Select purview(User
and Administrator).
Finally, press ▲/▼to select M/OK and press M/OK. A new user
will be added.
5. T9 input
In the text input box such as Name, Dept., etc., press button
M/OK to switch to T9 input method.
Press the [M/OK] key
to enable the T9
input method.
Press▼/▲button to
switch English or
Symbol mode.
While in Symbol mode,
press / button
to see more symbol.
Hotspot Mode
We recommend that the communication distance between
the device and the mobile phone should be within 15
meters. Complex environmental condition may have a
negative effect on range.
5
4 6
6. Wi-Fi setting
Press M/OK on the
initial interface.
Select System and
press M/OK.Press
▲/▼ to select
Ethernet. Select Wi-Fi
setting and press
M/OK to enable the
Wi-Fi setting method.
Press▼/▲ to select
network, enter
password to connect
to Wi-Fi (OK).
Our terminal is equipped with Wi-Fi. It supports either
built-in or external Wi-Fi module to implement wireless
data transmission over the Wi-Fi.
Select the connected
network and press
M/OK,you may see the
IP address of the
connected network.
8. Reset Opts.
7. USBdownload/Mobile APP download
Insert an USB host or SD card into the USB host or SD card slot
on the device.
1.USB download
The device allows downloading user data and attendance
data to a USB flash drive or mobile phone so that the data
can be processed properly by attendance software.
Press M/OK on the initial
interface. Select system and
press M/OK.Press ▲/▼to
select Reset Opts. Press M/OK
to reset. Press ESC to exit.
To restore all the setting of the device as default, including
communication option, system option, shift option and so on.
Notes:
After restoring factory reset,
system parameters, timer
state switch, alarm settings,
DST, Wi-Fi settings,
attendance parameters, shift,
etc. will be restored to default
values. The user data and
attendance records will
remain unchanged.
On the Application, administrators can manager employee shifts and
download monthly attendance report. Just add device and shake mobile
to download data. It's very convenient for a simply attendance company
or shops without PC Requirement.
2.Mobile APP download★(★stands for optionalfeature)
No: Device number.
Download Attlog :
Download the full attendance
data from device to USB disk
or SD card.
Download User : Download
the full user information and
fingerprint data to USB disk
or SD card.
Note: SD card is an optional
feature.
Press M/OK on the initial
interface. Select Data Mgt.
and press M/OK.Select
Download Attlog/User then
press M/OK.
Press M/OK on the
initial interface
then select System
and press M/OK.
Press ▲/▼ to select
Ethernet then select
PC Connection and
press M/OK.
Press / to
select Network Mode
then select hotspot
and press M/OK.
Select Wi-Fi setting
and press M/OK then
set hotspot
configuration and
press M/OK.
ZK Building, Wuhe Road,
Gangtou, Bantian, Buji Town,
Longgang District, Shenzhen
China 518129
Tel: [phone]
Fax: [phone]
www.zkteco.com
© Copyright 2017. ZKTeco Inc. ZKTeco Logo is a registered
trademark of ZKTeco or a related company. All other
product and company names mentioned are used for.
9. Technical Tips
1. Setting up Multiple Super Administrators.
Two or more administrators are recommended to set up
to ensure that relevant device operations are handled in
a timely manner even if an administrator is absent.
2. Difficulties in Fingerprint Matching
When a user presses a finger on the device, the device
prompts “Please try again “.
Ÿ Verify whether the fingerprint has been enrolled on
the device or not.
Ÿ Try 1:1 verification. Specifically, enter the user ID and
then press the registered finger on the device to increase
the matching success rate.
Ÿ Enroll two fingerprints with high quality again.
6
2. Power Supply
1. Power Connection
2. Battery Supply
5V DC Adaptor
Build in battery upto 8 hours standby.