User's Manual

Countertop TA Terminal User Manual 1
1 Instruction for Use
1.1 Recommended Operation Steps
Step 1: Set a department (not required if the default department is used). For details, see
4 Department Set.
Step 2: Enroll users. For details, see 3 User Management.
Step 3: Set attendance rules (not required if the default rule is used). For details, see 5.1 Attendance Rule.
Step 4: Set shifts (not required if the default shift is used). For details, see 5.2 Shift Setting.
Step 5: Arrange schedules of employees (not required if the default schedule is used). For details, see 5.3 Schedule.
Step 6: Record employees' attendance. Check that the device time is precise and start attendance.
Step 7: Download and review reports. For details, see
6.1 Download Att. Report
.
1.2 Finger Placement
Recommended fingers: The index finger, middle finger or the ring finger; the thumb and little finger are not
recommended (because they are usually clumsy on the fingerprint collection screen).
1) Proper finger placement:
The finger is flat to the surface
and centered in fingered guide.
2) Improper finger placement:
Slanting
Off-center
Not flat to the surface
Off-center
1.3 Verification Modes
1.3.1 Fingerprint Verification
1: N Fingerprint Verification
The terminal compares current fingerprint collected by the fingerprint collector with all fingerprint data on the terminal.
Press your finger on the fingerprint collector by adopting the proper finger placement. For details, see
1.2 Finger
Placement.