User's Manual
Table Of Contents
2 Countertop TA Terminal User Manual
When verification successful, an
interface shown above.
When verification failed, an
interface shown above.
1:1 Fingerprint Verification
In the 1:1 fingerprint verification mode, the terminal compares current fingerprint collected through the fingerprint
collector with that in relation to the user ID entered through keyboard. Adopt this mode only when it is difficult to
recognize the fingerprint.
Enter the user ID using keypad on
the initial interface. Then press OK.
Place the enrolled finger properly
on the fingerprint sensor.
When verification successful, an
interface shown above.
When verification failed, an
interface shown above.
Notes:
1. If it says that the enroll number is wrong, it means that there is no such number
2. If the device says "Please press again", place the finger on the fingerprint sensor again. You can try another 2 times by
default. If it fails after 2 times, return Step 1 for second operation.
1.3.2 Password Verification
In the password verification mode, the terminal compares the password entered with that in relation to the user ID.
Enter the user ID and PWD using
keypad on the initial interface. Then
press OK.
When verification successful, an
interface shown above.
When verification failed, an
interface shown above.
Notes:
If the device says "Invalid ID", enter the password again. You can try another 2 times by default. If it fails after 2 times,
return Step 1 for second operation.