User Manual FD1043V Version: 2.
Declaration Thank you for choosing our product. Before using this product, read this manual carefully to use the software properly. Proper use will result in good effect and fast verification. None of the content of this document shall be copied or delivered in any forms or by any means without the prior written consent of our company. The product described in this manual may include the copyright software of the company and its possible licensors.
Table of Contents 1. Note ....................................................................................................................................................................................................................................................... 1 1.1. Configurations ................................................................................................................................................................................................................. 1 1.2.
8.1 Attendance Record and Photo Query ........................................................................................................................................................... 23 8.2 Meeting Information ................................................................................................................................................................................................. 23 8.3 Stranger Photo ...........................................................................
1. Note This user manual is applicable for 21.5-inch, 32-inch and 43-inch FaceDepot series device. The content of this manual includes the UI display of 43-inch FaceDepot as an example to show some basic operations of the product. 1.1.
1.2. Installation 1.2.1 Installation Environment Notes: FaceDepot Device adopts visible light face recognition technology, so it is not recommended to place it outside, or in direct sunlight, or in window side, etc. FaceDepot Device must be stationed at an indoor place with good lighting. The camera is especially designed for face recognition.
Installation Procedure (Wall Hanging): The following tools are required for installation: Step 1: Unlock the security lock with the key, then use the cross screwdriver to turn the wall-hook screws counterclockwise by 2-3 cm. Step 2: Put a cushion on the FaceDepot device screen to avoid scratching the glass surface. Then push the wall hanging plate towards the lock to remove the hanging plate. Step 3: Attach the hanging plate on the wall horizontally.
Step 6: There are four hanging holes behind the FaceDepot device. It’s easy to hang it from top to bottom aiming to the four hanging nails on the hanging board. Note: Due to the weight factor, the FaceDepot device above 26-inch should be installed with the help of two people. After installation, make sure that it is fastened properly. 1.3. Precautions 1. This product can be used in an AC voltage range of 110–240 V.
1.4. 1.4.1 Notes for Access Control Wiring Access Control Interface Access Control interface is divided into 5 rows: J5, J6, J7, J8, J9. Currently J8 and J5 interface are used, rest others are reserved. 1.4.
In order to avoid the influence of the self-induced electromotive force produced by the electric lock on the access control system, a diode in parallel need to be connected on the electric lock, when the access controller is connected. Select FR107 diode with a faster response speed. FR107 diode has positive (shown as “+” in the figure) and negative (shown as “-” in the figure) poles.
2. Check-in interface and Main Menu 1. The check-in interface is divided into 4 areas: Title bar, Information bar, Monitoring screen and Check-in result. Title bar: It displays check-in title and main menu button. Information bar: It displays weather, date, software connection status icon, should arrive, not arrive, actual arrive and QR code. Click should arrive, not arrive and actually arrive to view the relevant statistics. Monitoring screen: It displays the picture captured by the camera.
Note: If the device has no super administrator, press to access the menu. If the device has a super administrator, then his/her verification is required to access the menu. For security purposes, you are advised to register as an administrator when using the device for the first time. Menu Function [User Management] Adds, edits, views, searches, and deletes basic employee information. [Communication Setting] Sets communication parameters such as the network, Wi-Fi, and PUSH.
3. Employee Management Click [User Mgt.] on the main menu screen. The personnel list screen is displayed, showing the basic information of all personnel, including their names, employee IDs, and portraits, as shown in the following figure. Delete an employee: Click in the upper right corner, select an employee, and click .
Add an employee: Click < in the upper left corner to return to the employee list screen. Click in the upper right corner to jump to the [New User] screen, as shown in the following figure. Field description: [Authority]: It includes Normal user and Administrator. After setting an administrator, administrator verification is required to access the main menu. Administrator can set up the admin password (6 digits). [Identity Type]: It includes Normal, VIP and Blacklist.
4. Communication Settings For the communication between device and the PC over a network, set communication parameters on the device. Click [WI-FI setting] to connect to the Wi-Fi, or choose [Ethernet setting] to connect to the network by Ethernet. 4.1 Wi-Fi Settings On the [Communication Setting] screen, click [WI-FI] to set WLAN parameters. 4.2 Ethernet Settings On the [Communication Settings] screen, click [Ethernet Setting]. The [Ethernet Setting] screen is displayed.
Menu Function [Ethernet] Enables the Ethernet connection. [IP address] The default IP address is 192.168.1.201. Change it as required. [netmask] The default subnet mask is 255.255.255.0. Change it as required. [gateway] The default gateway address is 0.0.0.0. Change it as required. [DNS] The default address is 0.0.0.0. Change it as required. [DHCP] Assigns dynamic IP addresses to network clients over a server. [IP Mode] 4.3 Only choose static mode can edit the IP.
5. System Settings Set system parameters based on your requirements. On the main menu screen, click [System Setting]. 5.1 Time and Date On the main menu screen, click [Date & time].
1. Click [Date & time]. 2. Scroll as required to set the year, month, and day, and press the [OK] key. 3. On the time and date screen, select [Set time]. 4. On the time and date screen, select [Select time zone], and scroll downwards to set the hour, minute, and second to select a time zone.
5. Click [Use 24-hour format] to display the time in the 24-hour format. 5.2 Face Parameters Click [Face parameters] on the system setting interface to enter the following interface: Field Description: [Face recognition threshold]: Sets the level of similarity between the registered face templates and the verified one in device. The default value is 83, and it ranges from 83 to 95. [Liveness detection threshold]: Lower value leads to higher accuracy with higher rejection rate.
5.3 Attendance Parameters The relevant attendance parameters can be self-defined. The interface is as follows: Field Description: [Duplicate check-in period]: User can set a time-period, in which, repeated attendance record of the same employee will not be considered. (unit: second) [Cyclic delete attendance record]: It indicates the duration up to which the attendance records will be saved. That means, when attendance record reaches the maximum capacity, it deletes the earliest record in cycle.
[Check-in time range]: The face appearing in the monitoring area will not be identified if the device is not within the check-in time range. It has 4 check-in time ranges by default. Now it can add more 5 time-ranges. 5.4 Stranger Photo Save Function In the system setting interface, click [Stranger photos save function] and select to enable. When it is enabled, strangers face appearing in the monitor display interface will be recognized and captured as unregistered person.
5.6 Blacklist Photo Save Function In the system setting interface, click [Blacklist photo save function] and select to enable. When it is enabled, person in blacklist will be captured if they appear in the monitor display interface. Captured photo records can be viewed in [Record query]. 5.7 Blacklist Alarm Function In the system setting interface, click [Blacklist alarm function] and select to enable.
in the device is BioTime or ZKBioSecurity software, the QR code generated in the device check-in interface will automatically obtain the device’s serial number information. When user scans the QR code to register, the device’s serial number will be seen in the review interface on software. The format of QR code address is: ZKBiosecurity3.0 software QR code address setting: http://server IP: port/app/v1/adreg BioTime7.0 software QR code address setting: http://server IP: /facereg 6.
[Delete all blacklist information]: Deletes all blacklist record from the device. [Delete blacklist photo]: Deletes all blacklist photos from the device. [Delete stranger’s photo]: Deletes all stranger’s photo from device. [Delete administrator’s authority]: Deletes the authority of a specific administrator from the device. [Delete all data]: Deletes all data from the device. 6.2 Backup Data Click on [Backup & Restore] in the data management module.
7. U Disk Management On the main menu screen, click on [U Disk Management]. The [U Disk Management] screen is displayed. Insert a USB drive into the USB port on the device before uploading and downloading data over the USB drive. 7.1 Uploading Data over a USB Drive On the [U Disk Management] screen, click on [USB Upload]. Menu [Upload User data] Function Uploads user information from the USB drive to the device. 1. Storage location for advertisement-related files.
7.2 Downloading Data over a USB Drive On the USB drive management screen, click on [USB Download]. You can import data from the device to other devices over the USB drive for spare use. Menu [Download User Data] Function Downloads user information from the device to the USB drive. [Download attendance photo] Download all attendance photos or for a specific time period. [Download stranger’s photo] Download all strangers’ photos in device or for a specific time period.
8.1 Attendance Record and Photo Query Select [Attendance record] to view all attendance record in device. Click on to filter the records accordingly, as shown below: Click the head portrait of attendance record to enlarge the person photo. Display information include: Employee name, Employee ID, Check-in time, Attendance photo, as shown below: Note: If attendance photo save function is disabled, then the user’s photo will be displayed.
includes meeting name, start and end time and number of participants. This function is only available for BioTime software, as shown below: 8.3 Stranger Photo Select [Stranger photo] to view or delete the stranger’s captured photo. Go to [System setting] [Stranger photo save function] to enable this function. 8.4 Blacklist Photo Select [Blacklist photo] to view or delete the blacklist capture photo. Go to [System setting] [Blacklist photo save function] to enable this function.
9. System Information The [System Info] menu allows you to view the device storage and version information. On the main menu screen, click on [System Info].
10. Advertisement Setting On the [AD Setting] screen, click on [Turn on AD Player] to enable advertisement playing and setting the advertisement photo/video switching time, as shown in the following figure. 1. Enable advertisement play. 2. Select pictures/videos. (Note: Select either advertising pictures or videos.) 3. Set the picture or video play time (unit: s).
Field Instruction: Switch advertisement time: Use to set the frequency of change for advertisements. Automatic switch advertising time without face: Use to set the time duration after which, advertisement picture/video will be shown if no face is detected. Manual sliding advertisement: Slide the advertisement to the left directly from the right part of face monitoring interface to switch advertisement manually.
Field Instruction: [Switch of status bar display]: Display or hide the guide bar of device. [VIP special effects setting]: Use to set the special effects of VIP. User can choose from either of the four special effects. The default setting is no special effect. [Switch of voice broadcast]: It will turn on the voice broadcast function. [Voice broadcast setting]: It will set the voice broadcast content, as shown below: Menu Function Custom content 1 Support letters, numbers and Chinese character.
12. Access Control Management Click on [Access control management] in the main interface of the device. Related parameters of access control can be set in this interface. As shown below: 12.1 Access Control Parameters Click [Access control parameter] to set the related parameter, as shown below: Field Instruction: [Door Lock Delay (s)]: The time duration for which the lock will be kept unlocked by the device.
of the door sensor is inconsistent with that of the door sensor mode, the alarm will be triggered. This time period is the Door Sensor Delay (valid value: 1 to 99 seconds). [Door Sensor Type]: There are three option: No, Normally Open, and Normally Closed. No means door sensor is not in use; Normally Open means the door is always opened in power-on condition; Normally Closed means the door is always closed in power-on condition.
be set manually and repeated with different devices. It’s disabled by default; the range is 0 - 256. 13. BioTime 7.0 Connection By allowing the device to communicate with the attendance module of the BioTime 7.0 software, you can add users through software. In addition, you can also upload attendance records to this software for attendance calculation. 13.1 Adding a Device There are two ways to add a device: Add a device automatically. Set a server IP address and port number on the device.
[Area]: Areas divided on the device for data management. [Time Zone]: Attendance time divisions. [Refresh Interval] (min): Frequency of sending a command request. [Fixed Transmission Time]: Time of transmitting data. You can set 10 values, separated by a semicolon. 13.2 User Management 13.2.1 Adding a User Go to [Personnel] [Add] to add a user. 13.3 Attendance Management After attendance records are uploaded to the software, set the schedule to manage attendance statistics.
14. ZKBiosecurity Connection By allowing device to communicate with the attendance module of the ZKBioSecurity software, you can use functions such as adding users and delivering advertising pictures or videos. In addition, you can upload attendance records to this software for attendance calculation. 14.1 Adding a Device There are two ways to add a device: Add a device automatically. Set a server IP address and port number on the device and click to add the device. Add a device manually.
The parameters are described as follows: [Device Name]: Attendance device name. Enter up to 20 characters. [Device Serial Number]: Serial number of the attendance device. [IP Address]: IP address of the attendance device. [Communication port]: Port number of the attendance device. The default value is 4370. [Attendance Area]: Areas divided on the device for data management. [Time Zone]: Attendance time divisions.
Recommended user photo requirements: Face in center, distinct face, no deformation of photo, no reflection. 640*480 [Person] and click [Personnel ID] or [Edit]. The user profile editing screen is displayed. (2) Click [Browse] to select a photo and click [OK].
(4) Click on [Capture] to capture the photo and click [OK]. 14.2.3 Importing User Information in Batches 1. Export the user information template, click [Export], select [Export Personnel], select user information fields, and click [OK] to download the template. 2. Fill in the template information. 3. Click on [Import] and select [Import Personnel]. The import screen is displayed.
The parameters are described as follows: [File Format]: The imported file format is Excel. [Destination File]: Click [Browse] to select a file to be imported. [Header Start Rows]: Enter the first line of the data. [Update the existed Personnel ID in the system]: If you select [Yes], the user information is updated; if you select [No], the user information remains unchanged. 14.2.
Note: Use the employee ID to name the photo. The supported format is JPG. The photo name must not contain special characters. Click on [Please Select Photo] and select multiple photos by pressing Ctrl. Click on [Start Upload] to import the photos. 14.3 Adding Advertisement Note: You can either add pictures or videos as an advertising. That means, if any picture is already added as an advertising picture to the device, then a video cannot be added. 14.3.
[Delete the Pictures]: Go back to the list of advertising images, select the images to be deleted, and click [Delete]. 14.3.2 Add AD Video Click [Attendance] [Device] [Advertisement], the interface is shown below: [File Upload]: Click [Browse] to select the required video to be uploaded. Size, suffix name will be displayed automatically. [Name]: Enter the desired video name, it shouldn’t be more than 10 characters.
Add Advertisement Click on the [Add Advertisement] button under the device to set the advertisement content of the device. The content list is added from the [Advertisement] column. Delete advertisement Select the required advertisement and click [Delete] to remove the advertisement content.
14.4 Attendance Management After attendance records are uploaded to the background software, set the schedule to manage attendance statistics. For details of the background software, see the related user manual. Click on the home screen to obtain the help system. 14.5 Scan Code Registration 1.
ZK Building, Wuhe Road, Gangtou, Bantian, Buji Town, Longgang District, Shenzhen China 518129 Tel: +86 755-89602345 Fax: +86 755-89602394 www.zkteco.com FD1043V User © Copyright 2018. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product andManual company42 names mentioned are used for identification purposes only and may be the trademarks of their respective owners. All specifications are subject to change without notice. All rights reserved.
