User's Manual

FD1043V User Manual 3
 Installation Procedure (Wall Hanging):
The following tools are required for installation:
Step 1: Unlock the security lock with the key, then use the cross screwdriver to turn the wall-hook screws counter-
clockwise by 2-3 cm.
Step 2: Put a cushion on the FaceDepot device screen to avoid scratching the glass surface. Then push the wall
hanging plate towards the lock to remove the hanging plate.
Step 3: Attach the hanging plate on the wall horizontally. Mark the fixing holes with a marker where the screws need
to be fixed (Generally the device below 22-inch needs 4-6 screws, device above 42-inch needs 6-8 screws)
Step 4: Drill 6-8 fixing holes with a depth of 50mm by using a 6mm or 8mm drill on the marked holes. (The number
of holes depends on the weight of the device.)
Step 5: Hammer the micelle or explosive screws of accessories into the drilled holes, then lock the hanging board
with self-tapping or cap of screw tightly.