User Manual
Table Of Contents
- Safety Cautions
- Read Before Use
- Structure
- User Introduction
- Basic Function
- Operation and Voice Prompt
- Initialization
- Random Password
- Voice Guide
- Normal Open
- User Data Synchronization
- Low Battery Alarm
- Volume
- 9V External Battery
- Emergency Mechanical Key
- Register First Administrator
- How To Use
- Register Other Administrators
- Register Normal User
- Delete by User Number
- Delete Administrator Group
- Delete Normal User Group
- Supplemental Register
- Upload User Data
- Download User Data
- Enable Normal Open
- Volume
- Open the Door With Fingerprint
- Open the Door With Password
- Open the Door With Card
- Quick Start
9
Register First Administrator
Operating Steps
Indication of The Lock
Touch the keypad to power on the lock
Press
0
and
#
to access into menu
Enter fingerprint or card or password
Press
*
to complete
registration and go back into
previous step
Continue to register other
identifications on the same
user number
Keypad backlight & fingerprint sensor is
power on
Voice prompt "Register administrator,
enter three digits user number"
Voice prompt "Completed, please
continue to enter"
Enter 3 digits user number
Voice prompt "Enter fingerprint or card or
password"
How To Use
Note:
1) Place one finger 3 times on fingerprint sensor to register fingerprint.
2) The length of password is 6 digits.
3) The regular length of user number is 3 digits. However, it is also correct to enter 1 digit or 2 digits with
the end of # as the user number. For example, 001 is equal to 1# or 01#.
4) Press * to cancel registration before the registration is complete.