Quick Installation Guide

InstructionsforInstallationandUseoftheC3100/200/400ControlPanel
9
3.2InstallationofAccessControlOperatorPanel
Wires
Figure31 AccessControl OperatorPanelWireInstallationDiagram
Notes:
1. Before connection, make sure the power supply is disconnected, because
connectionwithpowerconnectedwillcauseseveredamagetotheequipment.
2. The access control wires must be separated according to heavy and light
current; the control panel wires, electronic lock wires, and exit button wires
mustrunthroughtheir respectivecasingpipes.