Quick Installation Guide
InstructionsforInstallationandUseoftheC3100/200/400ControlPanel
11
Note: The diagram above takes the C3400 for example. By contrast, only
onedoor twoway access is applicable to the C3100 system; only twodoor
onewayortwodoortwoway accessisapplicabletotheC3200system.
The access control management system consists of two parts: management
workstation (PC) and control operator panel. They communicate via TCP/IP and
RS485 networks. On a 485 bus, each management workstation can be connected
with up to 63 C3 control operator panels (preferably fewer than 32). The
communication wires should be kept away from highvoltage wires as far as
possible,andshouldbe neitherroutedinparallelwithnorbundledwithpowerwires.
A management workstationisactuallya PC connected tothenetwork. By running
the access control management software installed in the PC, access control
management personnel can remotely perform various management functions, like
adding/deleting a user, viewing event records, opening/closing doors, and
monitoringstatusofeachdoorinrealtime.