Quick Installation Guide

InstructionsforInstallationandUseoftheC3100/200/400ControlPanel
18
Note: The diagram above takes C3400 for example. By contrast, C3100
provides no auxiliary input interface; C3200 provides two, and C3400
providesfour.
3.6ConnectionwithWiegandReaders
C3100canconnecttwo Wiegandreadersinthe onedoor twoway mode.C3200
provides four readers, which can be connected in the twodoor twoway mode.
C3400providesfourreaders,whichcan beconnected inthetwodoortwowayor
fourdooronewaymode.
The Wiegand interfaces provided by the C3 series can be connected to different
typesofreaders.IfyourcardreaderdoesnotusethevoltageofDC12V,anexternal
powersupplyisneeded. Areadershouldbeinstalledataheightofabout1.4mabove
thegroundandatadistanceof3050mmawayfromadoorframe.